h4831sc Fundamentals Explained

That is speculated to be the "head to" powder-or darn near it- for almost any bottle-necked cartridge one particular could handload. It's the muse for a great number of pet loads, however I have not been content with the effects.

In relation to bench relaxation matches, Hodgdon® rifle powders have posted far more wins than all other propellants merged. A high-quality extruded powder, it flows precisely and effortlessly by steps and provides match-grade precision when place to utilize.

The most obvious lead to is a rough/ruff bore. No quantity of copper fouling reducing brokers from the powder will proper this.

Caution utilizing SC or SSC created loads with extended Reduce, back off and work up. Use Risk-free loading strategies.

INgunner54 said: It has been a little bit, but I did get some 4831 SC to try. Found a node and shot some groups.

I understand, rough periods. H4831SC will certainly do the job, I just did not like the case density when loaded extended. I do not try to remember powder demand off the top of my head but I was launching a Berger 168gr VLD at three,000fps which is wherever I commonly intention to become. Within your circumstance using what you may have (and what I ought to have performed) I'd personally begin with the top with the bearing area on the bullet suitable with the shoulder/neck junction, and flirt with extending seating depths from there as soon as you discover a velocity node.

Hodgdon H4831SC (Short Lower) extruded rifle propellant is really a leading option for huge activity hunters who use handloader rifles. Introduced inside the nineteen fifties, this propellant is improved with shorter grain measurements which permits better powder flow and much more uniformity.

If you have some heavier .224" bullets, you would possibly find a load that actually works Alright With all the 4831. The bullets I attempted that were around 70 grains would not stabilize in my rifle, h4831sc which had the normal 14" twist. The 70-grain Speer was the most significant bullet that could stabilize, but it surely did that beautifully. It is a amusing-searching bullet that has a rounded nose profile, but it really shoots wonderful and kills well. Deer out h4831 vs h4831sc to about a hundred and fifty yards al went down right away with rib-cage hits.

dioni.a.312 stated: In my practical experience the only authentic variance is that the shortcut meters far better by way of reloading tools. The moment it's loaded theres no purposeful difference. I have listened to that the shortcut could possibly have a very small little bit faster burn up rate but It appears insignificant. Click to expand...

Liberalism; The difficult but approved notion that it's solely doable to select up a turd from the clean up finish.

I've had equivalent practical experience with H4350. For me, some ball powders is not going to shoot perfectly with everything other than Fed215's. Some components just Will not Enjoy nicely with other. Seems h4831sc like you've chosen three good powders, I'd personally count on at the least one of them to shoot.

NBTs or Hornady VMax, but Have a very minimal source of Varget, plus a great deal a lot more out there H4831SC. I shoot fifty five gr. loads Just about solely, mainly because that may be what the rifles shoot the ideal.

It's possible you'll either: one) Go on and also have the things listed under mechanically removed from your purchasing cart:

The fact that the H4831 is indeed a slower burning powder is specifically why you happen to be seeing bigger velocities attained with that powder, versus what you've found with the IMR stuff.